Still Building...

Still building. And it's still cold...

The workshop build begins...

Started to build the workshop today. It was freezing. And I didn't get as much done as I wanted... It may be a while before it's completed...

I'm Building the Workshop!

Just ordered a big pile of wood, as Carol says that I can build my workshop! I'm going to make a well ace workshop which will enable me to carry on with the rebuild, so the scoot is on hold for a while until I get the accommodation sorted. Watch this space!

Away for the Winter

The rebuild has been put on hold over the Christmas period, as 'someone' wants the kitchen back for Christmas lunch... I mean, it's only a day, isn't it? We could eat in the lounge, instead of on the dining table, surely? 

Anyhow, I have wrapped the scooter up in a big tarp and put her on the deck. The scooter, that is...

Stoneguarding

This evening I have stoneguarded the inside of the side panels, the underside of the front mudguard and the interior of the toolbox. Loads of masking, loads of spraying and loads of black stoneguard paint everywhere. Not a glamourous job, but it needed doing, and it should offer a lot of protection when I get it out on the road. That's all.

Speedo

So one of the first things I bought for this rebuild is a new speedometer unit. I bought it from ebay about a week after I got the scooter, and it has been sat around ever since. Initially, I was a bit disappointed that the twenty or so quid I paid for it (may be less, may be more - it was a while ago) didn't buy me a Lambretta logo above the milometer bit, as most Lambretta speedos have this lettering. I was going to buy another unit with the logo, but then I got to thinking that this would be an ideal spot for a bit of extra customisation... I printed out the Alpha Industries logotype to the correct size and I was going to cut out a frisket using matt frisket film to do the airbrushing on the speedo face.

That was far too fiddly to do, however, so I found an alternative... And these are the results. Special or what?

In the meantime while waiting for the engine I have done a few other little bits and bobs... I went to the end of season scooter rally at Morecambe, and in the parts fair there, I picked up a bracket to mount my CDI and Regulator, some anti vibration rubbers, metal gear change and throttle wheels and assorted springs, clips and fixings that I was short of. I also got a new Ducati Regulator and and LML CDI unit from Lambretta Cottage Restorations. The bloke there was really sound, to the extent that he was doing himself out of a sale because he had no CDI Units in stock of the type I was looking for. I ordered the part from him, however, and it came through the post within a couple of days. Anyone after any parts for their rebuild (I have also bought one of their complete nylon lined cable sets too), I strongly recommend these people as they are honest, fair and supply good quality parts. Most of the above mentioned parts are now fitted, and waiting for the engine to arrive... As I am.

Spoke to Jonsey about the engine today... It is coming on apace now. The crank is fitted, and the top end has been rebuilt and put back on. The Gears will be the next bits to be given the Grimspeed treatment, and then it should be a matter of putting in the new bearings and seals and throwing the thing back together... I hope!

More Headset

So the headset saga continues... The job I have been putting off is the wiring. To me, it is a nightmare - my brain can't cope with it at all.

I was up at Scootlife, my local scooter shop run by Taff, buying some bits when Ady called in for some stuff for his T5. I explained my lack of progress with the rebuild being down to my reluctance to start the wiring, and Ady kindly offered to come down and give me a lift with the wiring. He arrived next day and we (or rather he) set to work. I was right about it being a nightmare... I tried to follow what was going on, but failed after about a minute. Anyhow, 30 Maplins Bullet connectors, five brews, a few biscuits and umpteen fags later, and we were done. We had a working scooter. We tested the wiring using a battery charger to give us some power instead of the engine (Ady is a qualified electrician, so don't try this unless you know what you are doing) and the Halogen light conversion (from Sparkrite Technologies), the horn, the brake light and tail light all work! Fantastic! And that's with a dodgy switch I bought from ScootRS (should have been 3 position, not 2 - typical!).

We put in a load of extra earths as well - apparently, you can't have enough of them - so hopefully, the scooter will be a good runner, electrically. I am going to do myself a wiring diagram as soon as I get the engine back from Jonsey and get it all wired up, so that if I have to disassemble it, I have a chance of putting it all back together again. Incidentally, the blue wire (not the correct colour, I know... It's all we had) is the feed for the switch on my front brake light. The other wire is in there somewhere too.